Custom Search

Monday, November 3, 2008

JBL Professional EON® Portable Loudspeakers


Representing the next generation of its groundbreaking and industry-standard EON® series portable loudspeakers, today JBL is introducing the EON500 series. The unveiling of the EON500 series self-powered and lightweight speakers immediately raises the bar in the category of molded powered loudspeakers in all aspects, from industrial design to sonic performance, integrated utility and portability.

"Since its introduction in 1995, the EON series has led the way in terms of versatility, performance and value, as evidenced by the sale of nearly one million EON speakers to date," said Simon Jones, Director of Marketing, Portable PA, JBL Professional. "Thanks to the acute attention to detail in the design engineering of EON, the highest level of quality is delivered to the end user. JBL has developed the new EON500 series loudspeakers with this same dedication to performance and reliability, while increasing portability, through an even lighter system and designed ergonomics. It has more performance, it's lighter and it's even easier to move around."

There are three models in the new EON product range. Each of the full-range EON500 series compact, lightweight models features an on-board mini-mixer with loop-thru or mix-out capability, allowing for greater control of the loudspeaker's output. The EON500 series loudspeakers also offer selectable EQ, multiple suspension points, soft-grip handle and a full screened backed grille for extra component protection.

The EON500 series loudspeakers feature a combination of JBL's patented engineered components, enabling a smaller enclosure and lighter weight than competitive models. When combined with the products' ease of handling, the EON500 series loudspeakers are ideal solutions for everyone from mobile DJs and musicians to systems integrators.

The unmatched reliability of the EON500 series loudspeakers is the result of JBL's integrated design of the woofer, amplifier, wave guide and thermal management of all components. Additionally, all electro-acoustic components have been specifically engineered for the EON system. Because the features and manufacturability of the system have also been developed in unison, the highly refined production process contributes to the reliability of the products.


The EON515 and EON510 are both 2-way powered speaker systems, offering mic and line level inputs, as well as selectable system EQ, giving users a "loudness" type control and the ability to roll off the low frequency for maximum performance with a subwoofer or when used as a floor monitor. Both models feature one XLR/ quarter-inch combo connector and additional quarter-inch inputs providing input flexibility and the ability to mix multiple sources. Each loudspeaker features one XLR output where the output signal is selectable, either the whole mix may be looped to another speaker (or sent to a mixing console), or simply the primary input for traditional "daisy-chaining."

The EON515 is a 15-inch 2-way loudspeaker system offering a total of 450/900 watts (continuous/burst) power. All power in the EON515 is derived from latest Crown® Class-D technology; it's highly efficient, compact and incredibly lightweight — less than 33 pounds (15 kilograms). The EON515 offers a 15-inch Differential Drive® woofer, a compact high-performance compression driver with a 1-inch exit and neodymium motor on a 100° x 60° wave guide.
The ultra-compact EON510 10-inch 2-way loudspeaker system offers a total of 280/560 watts (continuous/burst) power, weighing only 17 pounds (7.7 kilograms). The EON510 offers a 10-inch Differential Drive woofer, a compact high-performance compression driver with a 1-inch exit and neodymium motor on a 100- x 60-degree wave guide.

The EON518S subwoofer features a single 18-inch Differential Drive woofer in a vented enclosure, powered by a 500/1000 watts (continuous/burst) amplifier. It features a pole mount cup for sub/satellite applications, level control, dual inputs, a stereo crossover network, peak limiter and polarity reverse switch. It also has a speaker level input increasing connectivity, flexibility and system configuration options.

"Once described as 'the ultimate workhorse, utility loudspeaker,' the success of the EON line is based on its broad appeal, ranging from simple PA applications to professional sound reinforcement, making it extremely useful for DJs, musicians, major rental companies, schools, churches and institutions alike," Jones added.


"As with the existing EON lineup, utility will continue to drive the success of the new EON models, which truly represent the next generation in portable loudspeakers."

For more information, visit their web site at www.jblpro.com.

Sunday, October 19, 2008

Sony's DAV-HDX277WC BRAVIA Home Theater SYSTEM





Get the most out of your down time at home with Sony's DAV-HDX277WC BRAVIA home theater system. Five speakers and a subwoofer deliver engaging surround sound with movies, TV shows, and music. The built-in five disc changer plays your DVDs and CDs. Plus, this system features an additional powered speaker you can place in another room to play music from the 'HDX277WC wirelessly.

Easy, wireless multi-room audio. The included Sony AIR-SA10 powered speaker requires no complicated setup. Listen to music in a bedroom or basement, even while a friend enjoys a surround sound movie in the main home theater room. Expand your system with up to three additional AIR-SA10 powered speakers for music throughout your house.

Dock your iPod and browse your tunesPlace your iPod into the included dock, and you can listen to your tunes through the 'HDX277WC's speakers, or on the AirStation wireless speaker in another room. You can even browse through your songs using the system's remote.

Easy automatic setupSony's auto calibration technology makes it a snap to adjust the surround sound settings to your specific room and furnishings. Simply place the included microphone in your favorite listening position, and the system optimizes its own speaker distance and delay settings in about 30 seconds. The DAV-HDX277WC can also upconvert your standard DVDs to 1080p resolution through its HDMI output for a smoother picture with your compatible HDTV.

SPECIFICATIONS::

· Home theater system with 5-disc CD/DVD player/receiver, 5 surround speakers, and subwoofer
· Includes Sony iPod dock
· Includes 1 Sony Air-SA10 wireless powered speaker
· Add up to 3 more
AIR-SA10 powered speakers for easy expansion
· Compatible with optional
WAHT-SA10 wireless rear speaker kit
· Digital video upconversion for DVD playback
· Selectable 720p/1080i/1080p output via HDMI digital interface
· Plays DVD-Video discs, DVD-Rs & DVD-RWs
· Plays CDs, audio CD-Rs & CD-RWs, MP3 CDs and SACDs
· Plays digital picture CDs (JPEG)
· Built-in Dolby® Digital, DTS®, & Dolby Pro Logic® II processing, for surround sound from DVD, VHS, and stereo sources
· 6-channel amplifier

(143 watts x 5 for surround channel output, plus 285 watts for subwoofer)
· Digital Cinema Auto Calibration for easy setup
· Digital tuner with 30 AM/FM station presets
· Proprietary Digital Media Port for connecting included iPod dock, optional
wireless PC music player, or other accessories
· Analog audio input
· Coaxial and optical digital audio input
· Front-panel minijack audio input
· Video output for TV (composite, component video, HDMI)
· Remote control
· Speaker wire and subwoofer cables included

· DVD changer/receiver: 17"W x 3-3/8"H x 17-9/16"D
· 2 front speakers:

3"W x 8-3/4"H x 3-1/8"D (each)
· Center channel speaker:
10-5/16"W x 3-5/8"H x 2-3/4"D
· 2 rear speakers:
4-1/16"W x 6-3/8"H x 3-1/16"D (each)
· Subwoofer:
8-11/16"W x 15-7/16"H x 12-11/16"D
· Warranty: 1 year

Sunday, October 5, 2008





Building on the technology that spawned our highly acclaimed SWA1801, the Mackie SWA2801z features an 800-Watt FR (Fast Recovery) Series amplifier and dual high-precision 18" transducers mounted in a custom designed enclosure. The SWA2801z was intentionally over-engineered for both durability and performance by the world-renowned loudspeaker gurus at EAW (Eastern Acoustic Works). Onboard Mackie Active electronics ensure seamless integration of the amplifier and transducer at all times, creating a system that is highly efficient and versatile. This all adds up to a high-output system that’ll shake the dust from the rafters!

TRUE MACKIE ACTIVE DESIGN
Active doesn't just mean the SWA2801z has an amplifier bolted on its back — it means optimized electronics that provide complete control and maximum performance over all components. The onboard Active system controls the crossover filters, equalization, protection for the transducer and electronics, and provides real time vigilance over the entire system. There is simply no way that you can get this kind of full system functionality by strapping an amp on the back of a passive speaker box.




CROSSOVER BUILT RIGHT IN
Connecting and setting up the SWA2801z couldn’t be easier. It accepts a stereo or mono line-level signal via female XLR input jacks. Male XLR Thru jacks are provided for daisy-chaining the signal to additional SWA2801z cabinets. The built-in crossover routes the high frequency content to the high-pass output jacks, which can be used to feed the inputs of full-range Active speakers, such as those in the Mackie SAz Series, or an amplifier powering a pair of passive speakers. A Subwoofer Level control lets you adjust the balance between the subwoofer and the full-range speakers.

800 WATTS OF CHEST POUNDING POWER

The onboard amplifier, which produces 800-Watts continuous power, sits on a massive heatsink, eliminating the need for fans and dramatically extending life expectancy. A tremendous benefit of having the amplifier inside the subwoofer enclosure is that the SWA2801z functions as a complete system, optimizing acoustic, electronic, and mechanical designs to achieve the highest level of performance and value.

VERSATILE PLACEMENT
The SWA2801z subwoofer is designed to sit on the floor, either upright or on its side. (Feet are provided on the bottom and on one side.) A pole mount cup (socket) is provided on the top and on one side of the SWA2801z for mounting Active loudspeakers such as the Mackie SA1521z, SR1521z, SRM450 or SRM350. Amplified passive systems such as S200, C300z or S408 can also be deployed in this manner. (When pole-mounting loudspeakers on the SWA2801z, please use the Mackie SPM100 and only with recommended models.) Additionally, footholds are embedded in the cabinets top and side that allow for stacking of our larger Active speakers such as the SA1532z (see image above).

SOLID REAL WOOD CONSTRUCTION
For high-output loudspeakers, real wood just sounds better—and it looks better, too! The SWA2801z enclosure is made of select 15mm Baltic birch plywood and finished in black splatter paint. Carrying handles are integrated into each side for easy loading, and casters are attached to the rear for smooth transport.

Saturday, September 13, 2008

Community M12 speakers

The M12 stage monitor system is a compact, high style, no-compromise solution to the demands of high performance monitoring. At 10½" high, the M12 offers clean sightlines for the audience and the camera. The rugged multi-layer glass composite construction, "Texas Boot-proof" heavy gauge steel grille and an abrasion resistant non-reflective Tuf- Coat™ finish make the M12 an excellent choice for TV broadcasts and stage productions. The dual NL4 connectors are tucked safely away in a pocket beneath the enclosure. Specially molded channels and cable clips allow the user to bring the speaker cables out of the back or either side of the monitor. These exits also allow easy positioning of the monitor. The M12 contains a high-powered 12" woofer and a
2" exit B&C™ wide band high frequency driver. The high frequency driver is mounted to a molded onepiece asymmetrical horn with a 90-degree pattern at the top and 40-degree at the bottom, allowing fullrange output close up or horizontally at a distance.The vertical dispersion is 70º. The M12 is available in black or white finishes, and right or left horn configurations.


M12 FEATURES
- Low-profile, high-style exterior
- Small footprint
- Multi-layer glass composite construction
- Non-reflective black or white Tuf-Coat™ exterior with matching
heavy-duty non-reflective grille
- Unique hidden handle
- High powered, 12" woofer
- 2" wide-band compression driver on an asymmetrical horn
- Biamp/passive switchable with well protected dual NL4
connectors
- Cable safety management system
- Available in right or left horn configurations
- Available in black or white finishes
- Five-year warranty

Community DnD Speakers


The DnD series is a range of loudspeaker systems designed for professional musical performances. The speakers offer an exceptional value to vocalists, instrumentalists, DJs, and club owners, with options for a wide variety of applications, including permanent installations.
The multi-angle DnD12 and the front-of-house DnD15 are two proven performers with a price-toperformance ratio that is unmatched in the industry. Both systems feature Community'sFocused Array™ high frequency, dual-driver pattern control horn and unbeatable PowerSense Plus™ DDP driver protection circuitry. Each loudspeaker and crossover component is backed by Community's limited 'no fault' warranty for the first two (2) years of use.

DND FEATURES
- Heavily-braced MDF construction
- Captive flying points
- Die cast pole socket
- PZT Focused Array™ horn.
- PowerSense Plus™ DDP driver protection circuitry
- NL4-compatible and ¼-inch connectors
- Two-year "no fault" warranty on loudspeaker and crossover components
- Five-year transferable warranty against manufacturing defects

Community MVP Series II Speakers


There are seven MVP Series II models in all: Four fullrange two-way cabinets, a pair of powerful floor monitors, and a potent subwoofer system. All fullrange systems utilize Community's proprietary HF20 high frequency compression driver featuring a Ferrofluid-cooled, non-metallic diaphragm to insure smooth performance and extremely low distortion. Community's DYNA-TECH Driver Protection System safeguards all MVP Series II models. With Dyna- Tech, your speaker can operate at its full dynamic range and still react quickly to excessive musical
transient peaks without worry of damaging the speaker. It also means your speaker is protected from the instant the power amplifier is plugged into it and/or turned on. DYNA-TECH illuminates a red indicator light found on the input panel of all models. Each loudspeaker and crossover component is backed by Community's limited 'no fault' warranty for the first two
(2) years of use.

MVP SERIES II FEATURES
-Heavily-braced MDF cabinet construction
-Captive flying points
-Die cast pole socket
-New HF20 non-metallic, Ferrofluid-cooled compression driver
-DYNA-TECH driver protection circuitry
-NL4 compatible and ¼-inch connectors
-Load matching 150 Hz hi-pass output crossover (subwoofers)
-Two-year "no fault" warranty on loudspeaker
and crossover components
-Five-year transferable warranty against manufacturing defects

Community Tandem Drive2 Speakers


There are four Tandem Drive² models in all: two full-range models that can be combined with either of two subwoofers. This mix-and-match arrangement offers portability, power, clarity, and versatility for clubs, DJ's, high energy worship, and live performance applications. All Tandem Drive² models feature two of Community's patented Cool- Coil™ drivers, cleverly designed to draw destructive heat away from the voice coil, thus assuring extended high level operation. The full-range systems utilize Community's proprietary UC1 high frequency compression driver featuring a Ferrofluid-cooled, non-metallic diaphragm to insure
smooth performance and extremely low distortion. Predictable high level, low distortion operation, Community's DYNA-TECH Driver Protection System and remarkable low frequency response -- all in a compact, well-braced, lightweight cabinet clad in a high impact exterior TufCoat™ finish, rounded out with Ergo-Grip handles for easy portability. A built-in stand socket and four rigging points further enhance the versatility of these systems.

TANDEM DRIVE2 FEATURES
- Heavily braced 13-ply Baltic birch construction
- Captive flying points
- Die cast pole socket
- UC1 non-metallic, Ferrofluid-cooled compression driver
- Cool-Coil™ woofers
- DYNA-TECH driver protection circuitry
- NL4 compatible and ¼-inch connectors
- HF cut/boost and bi-amp control
- Load matching 150 Hz hi-pass output crossover (subwoofers)
- Five-year warranty

Community SONUS


SONUS high-end line loudspeakers for professional musicians feature low distortion, high-impact sonic capability, ease of transport, and durable construction to withstand the rigors of the road. All SONUS models are precision engineered, both acoustically and structurally, to perform
night after night under the demanding conditions encountered by travelling bands and DJ’s.
SONUS full-range models include two-way 12" and 15" systems, and three-way 12" and 15" systems. The multiangle 12" two-way SONUS 1296 can be used as a FOH system or on the stage as a floor monitor. All models can be switched between active bi-amped and passive ingleamped operation, to readily accommodate the needs of the user. A music/voice presence switch is provided as a quick means of altering the upper mid-range to suit the acoustical conditions of the venue. For extended low frequency response, the SONUS line includes two subwoofers with a choice of dual 15” or dual 18” high-power cone drivers. The dual 18” model is provided with integrated casters for convenient load-in and load-out. Both models feature a High-Pass Output for seamless integration with the full-range systems.
SONUS FEATURES
- Durable Birch plywood enclosure and protective steel grilles
- Carbon ring cone LF drivers
- Passive/Bi-amp and Music/Speech switches on full-range models
- DYNA-TECH protection circuitry
- UC1 non-metallic, Ferrofluid-cooled compression driver
- Cool-Coil™ woofers
- Optional seat track rigging accessory
- Ergo-Grip handles
- Five-year warranty

Community Professional Audio Products


Community is the well-known name for high range loudspeakers for Professional Audio System. It has different categories in Speakers for every type of Applications like Auditorium, Club/DJ, Live Performance, Public Address System, Theatre, School, University, Commercial Buildings etc..


XLTE


XLTE loudspeakers provide the performance and versatility you need for live sound. Designed for professionals, they have the same type of construction used in top-of-theline touring systems: 13-ply Baltic birch enclosures, full-size 16 gauge steel grilles, heavy-duty steel handles, steel input panels, and NL4 compatible input connectors. Capabilities for ground stacking, stand
mounting and suspension are built in.The XLTE series offers a distinctive range of systems to meet your sound requirements with 12" and 15" FOH and monitor systems along with 15" subwoofers. XLTE systems are designed to grow with your business. You can begin using passive mode operation, then progress to biamplifying and adding subwoofers without using electronic crossovers or adding subwoofer amplifiers. For ultimate performance you can add electronic crossovers and additional amplifier channels. XLTEs are voiced for live sound, providing excellent sound projection, exceptional vocal performance, and balanced musical reproduction. After playing through XLTE, performers have said, "That's the best we've ever sounded." No better statement describes XLTE.
click on below links to view ful details...
SONUS

TANDEM DRIVE2

MVP SERIES II

M12

are some of the speaker series for PRO Audio systems..

Friday, September 5, 2008

JBl Wireless Compact Speakers




ENJOY GREAT JBL SOUND AROUND YOUR HOME — WIRELESSLY.


PLACE THESE SPEAKERS IN THE BEDROOM, IN THE KITCHEN, IN THE GARAGE OR EVEN ON THE PATIO*, wherever you want great JBL sound. And when you connect the JBL Control 2.4G wireless system to your computer, iPod® or other portable media player, your music library is anywhere you want it to be!



SYSTEM CONTAINS:


• 2.4GHz wireless transmitter


• 2-Way, 4" (100mm) active speaker with 15-watt-per-channel amplifier


• 2-Way, 4" (100mm) passive speaker


• Connection and wall-mount accessories


• Remote control


* The JBL On Air Control 2.4G speakers are not weather-resistant and should not be left outdoors when not in use, or used outdoors during inclement weather.


General
Frequency Response (± 3dB) 50Hz - 20kHz
Amplifier Power Output 15 watts per channel
High-Frequency Driver 1/2" (12mm)
Titanium-laminate, magnetically shielded Low-Frequency Driver 4" (100mm) Magnetically shielded

Operating Range Up to 70' (21m)**

Like all wireless devices, the system’s operating range may vary, depending uponvariables such as building construction methods and materials, atmospheric conditions and other sources of interference.
Power Supply Worldwide — 100v - 240v, 50/60Hz
Power supplies included for transmitter and active speaker.

Dimensions (H x W x D)
Speakers:9" x 6-1/8" x 5-1/2"(229mm x 156mm x 140mm)
Transmitter:1-1/8" x 4-7/8" x 3-7/8"(29mm x 124mm x 98mm)3-3/4" (95mm)
Weight
Active Speaker: 4.6 lb (2.1kg)
Passive Speaker: 4.3 lb (2.0kg)
Transmitter: 0.5 lb (0.2kg)

Bose Speakers and Company


Bose Speakers for Beginners- Whet you need to KnowBose speakers are considered one of the best kinds of speakers on the market. Their sound quality is difficult to surpass and their manufactured quality is exceptional. Bose as a company is about 48 years old. The company was established in 1964 in the United States and in particular in Based in Framingham, Massachusetts. The company was founded by Dr Amar G Bose an electrical engineering professor at Massachusetts Institute of Technology in Cambridge. The company is considered one of the best manufacturers and a specialist in high-end audio systems and speakers. Bose was making home theatre speakers way before they became popular in the market and established itself as a leader in this home theatre speaker market from early on. The company makes a variety of home theatre systems as well complete with amplifiers and speakers. Due to the high quality of Bose products and speakers in particular, the brand name Bose is widely recognized. Specifically for the US, Bose is considered the best brand name for audio speakers and high end stereo systems as well as for home theatres. Bose has a rich product line and makes top-notch speakers, amplifiers, acoustic headphones, wireless headphones and all kinds of high end technology speakers. They even make professional equipment for musicians and audio professionals; Bose has a complete line of amplifiers and loudspeakers.


If you love music, if you appreciate listening to music in all the detail if you enjoy sitting back and listening to your favourite track in the best possible way then you will love Bose speakers, headphones and stereo systems. However, on some occasions buyers who purchase the sets because of how clear the sound is, when they listen to speakers on display in the shop complain that when they buy the Bose speakers the quality is not the same. Many complain that it is difficult to reproduce the same sound quality at home than they do at the retailer. What music lovers look for from a set of Bose speakers is clear sound, excellent dispersion and low distortion. Whoever buys a Bose speaker they are looking for extremely accurate reproduction of sound. What usually happens is that people get disappointed when they buy the speakers because the lack the right amplifiers. In order to get the most out of your Bose speakers you need to make sure that your amplifier receiver is in the correct power range. It is not because of the speaker that sound quality is decreased but because there is a lack of compatibility between amplifier and speaker. Another factor to get the most out of your set of Bose speakers is positioning. Make sure you know exactly where the best place to place them. Buying a good quality speaker like a Bose speaker will not necessarily guarantee best sound quality results. Even though Bose speakers a probably the best in terms of quality out there on the market if you are considering buying a set you ought to read up on speaker position and amplifiers to guarantee the best possible results.


If you are looking for Bose speakers then you might be interested in Discounted Bose Speakers. Most people prefer the Cheap Bose Companion 2 Multimedia Speakers v2 or Bose v-300 Surround Speakers

Wednesday, August 13, 2008

DENON DVD-3930CI

The DENON DVD-3930CI has many of the same features and processing offered in our flagship series player. The back panel is fully loaded with all the connections most installers and home audio/video enthusiasts need to connect to a high-end audio/video system. Component connections are offered in the standard RCA type connection and in the more commercial BNC type connection. The HDMI output now supports resolutions up to 1080p for compatibility with current HD displays.

In addition, the DVD-3930CI offers all video outputs live, for multiple connection/zone configurations. Add to this the multiple video and audio adjustments provided using the included fully backlit remote, and you have a player that you can calibrate right on the money and easily operate in either daylight or theater light conditions.


DENON DCM-290

The DENON DCM-290 5-disc carousel changer is a top performing CD changer at a very affordable price.

Supported formats include CD/CD-R/RW discs and the DCM-290 has WMA and MP3 decoders for extended play use.


This CD player is a great complement to any stereo system.

CROWN ELECTRONICS


Crown History: From its humble beginnings in 1947, Crown International has grown to become one of the world's largest and most respected manufacturers of power amplifiers and microphones for professional audio markets.

Crown’s history traces back to 1947 and an Elkhart, Indiana minister named Clarence C. Moore (1904-1979). Moore, a longtime radio enthusiast, had spent the early part of the ’40s in Quito, Ecuador working for HCJB, a non-profit Christian broadcasting and engineering group.

Following his return to the United States, he felt the desire to supply Christian broadcasters like HCJB with quality electronic products. As a result, Moore founded International Radio and Electronics Corporation (IREC) in 1947 and converted a former chicken coop into the budding manufacturer’s first production facility.

The company’s early reputation was built on a family of rugged and compact open-reel tape recorders designed to operate reliably when used by missionaries in remote, often-primitive regions of the world. After modifying and distributing several existing models (Magnecord, Recordio, Pentron and Crestwood) for the first couple of years, Moore obtained a patent in 1949 for a groundbreaking invention: the world’s first tape recorder with a built-in power amplifier (15 watts).

Eventually, Moore’s wife and co-founder, Ruby (deceased 2002), suggested that ‘International Radio and Electronics Corporation’ was too long a name for the company. Since IREC had by this point produced vacuum tube tape recorders branded ‘Royal’ and ‘Imperial’, in addition to the fact that the emblem on those products was a fancy crown, she felt that the company should simply be called Crown.

Her husband agreed, and, in the ’60s, the company’s name was changed to ‘Crown International, a division of International Radio and Electronics Corporation’. Finally, in 1975, the stockholders voted to change the name of the corporation to Crown International, Inc.

In the 1960s, the introduction of the DC300 high-powered, solid-state amplifier offering 150 watts per channel at eight ohms and AB+B circuitry moved Crown into a leadership position in worldwide power amplifier markets. Well over 30 years later, many DC300s are still being used in professional audio applications.

In the 1970s, Crown launched the PSA-2 Power Amplifier with a built-in computer to maximize performance of its output transistors. Product diversification began with the introduction of the still-popular line of Pressure Zone Microphones (PZM) and TEF audio analyzer.

With the implementation of Grounded Bridge circuitry in the ’80s, Crown offered an innovation providing lower distortion, less thermal stress, higher acoustic output, greater reliability, superior power density and audio quality, Grounded Bridge circuitry was integral to the engineering of the Macro-Tech and Micro-Tech amplifier lines.

The 1990s found Crown developing computer-controlled audio systems with the IQ System. In 1997, the company added another new milestone in audio technology with the introduction of the K2 amplifier featuring Balanced Current Amplifier circuitry offering innovative thermal and energy efficiencies.

Acquired by Harman International in March of 2000, Crown has continued to move forward, producing numerous
innovative designs, including The CTs Series amplifier line for the installed sound markets, Crown’s next-generation IQ System, now called IQ Network, and the I-Tech Series touring amplifiers, the world’s most advanced professional amplifier and representing the pinnacle of their over 30 years of amplifier leadership. These products and more embody the reliability and innovativeness that have long been the manufacturer’s hallmarks. And with each product backed up by a three-year, no-fault, fully transferable warranty, Crown today continues to delight its customers with products that consistently exceed both specifications and expectations, even on the most demanding tours and installations.

Crown International Senior VP of R&D Gerald Stanley, who originally joined the company in 1964 as a tape recorder line technician and amplifier design engineer, comments on Crown’s success over the years. “In an era of cookbook designs and buggy software, it would seem that the most basic lessons of history have been forgotten,” he says. “Crown’s recipe is simple: design, build and service each product as if you were the customer. This approach not only drives the product to excellence, it drives the people to be the best that they can be.”

McIntosh XRT2K Loudspeaker



McIntosh XRT2K Line Array design comes with a set of 110 SPEAKERS...

McIntosh engineers made the dream come true with a three way dual column design meticulously housing forty tweeters, sixty-four midrange and six woofers.

All elements are chosen for use with high power amplifiers up to 2,000 watts

Drivers:
Six 12” Aluminum Cone Woofers
Sixty-Four 2” Titanium Midranges
Forty 3/4” Titanium Tweeters

TITANIUM DOME TWEETERS AND MIDRANGES
40 tweeter domes house titanium diaphragms for a frequency response to 45kHz. The 64 midrange drivers each have a titanium inverted dome. Titanium has unwavering rigidity, resulting in smooth uncolored reproduction.

ALUMINUM CONE WOOFERS
6 aluminum cone woofers produce powerful bass down to 10Hz without any trace of “chestyness.”

THREE SETS OF INPUTS
Three sets of massive gold plated input connectors allow bi and tri amping and wiring.

LINE ARRAY DESIGN
The XRT2K is a full range line array system with mirror-image symmetry. Listeners sitting close to the system will not hear ‘hot spots’ of certain frequencies and listeners at a great distance notice little drop off in sound. The sound dispersion pattern is smooth and wide, resulting in exceptional stereo image in a greater variety of listening positions. The sealed aluminum cabinet allows the system to be located close to a rear wall without bass “boom.”


  • Usable with up to 2,000 Watts of Power
  • Can be driven with as Little as 75 Watts
  • 8-Ohm Impedance for Compatibility
  • Tri-Wire and Tri-Amp Capability
  • Narrow Width for Placement Flexibility
  • Controlled Vertical with Wide
  • Horizontal Dispersion
  • Massive Overload-Proof Crossover
  • Aluminum Enclosure
  • Titanium Tweeters for Response to 45kHz

NOMINAL IMPEDANCE
8 ohms

POWER HANDLING
2,000 W


MAGNETIC SHIELDING
All drivers

ANECHOIC RESPONSE
16Hz – 45kHz

REFERENCE SPL
2.8V/1m: 89dB

CROSSOVER FREQUENCIES
250Hz and 1.5kHz

FINISH
Piano black with optional finishes available

GRILLE
Black knit cloth with high gloss black trim
and optional finishes available

DIMENSIONS (H x W x D)
84-1/4” (214cm) x 19” (48.26cm) x 18” (45.72cm)

WEIGHT
452 lbs. (205kg) net

Thursday, July 31, 2008

Sennheiser PXC350




Sennheiser PXC 350:

The PXC 350 is a circumaural high-end travel headphone set with NoiseGard™ Advance technology for active attenuation of ambient noise.The PXC 350 enables an unprecedented sound experience for people on the move, thanks to its adaptive baffle damping in combination with the patented Duofol diaphragms, which prevent unwanted partial oscillation and thus guarantee a highly natural, lifelike sound quality.NoiseGard™ is an active noise compensation system which Sennheiser originally developed for use by pilots, who have to rely on good sound quality and efficient protection against ambient noise even in high-noise environments. NoiseGard™ actively compensates the noise, based on the physics principle of sound and counter-sound, which works as follows: tiny microphones pick up the low-frequency ambient noise in the vicinity of the user’s ear. Based on that noise interference, the NoiseGard™ electronic module calculates the required counter-sound wave with 180° phase inversion. The unwanted noise and the phase-inversed wave meet directly at the user’s ear where they virtually cancel each other out. The result is an effective reduction in ambient noise. The music is transmitted in the same high quality, so that even quiet passages can be enjoyed in noisy environments.The PXC 350 features the NoiseGard™ Advance technology. This technology is a further development of the filter functions used in the original NoiseGard™ system, and enables even better active attenuation of ambient noise of up to 85%. It is of course also possible to use these headphones passively, i.e. without NoiseGard™ and without batteries.
The PXC 350 is foldable and is supplied complete with a practical transport case, 2 AAA batteries and audio adaptors (double mono and 6.3mm). Volume control integrated in the single-sided cable, which is detachable and replaceable

Sennheiser e835 Dynamic Microphone









PRODUCT DESCRIPTION :



Intense. Lead, vocal stage mic, designed to perform under pressure. Uniform frequency pick-up pattern maintains signal quality when moving on and off axis during performance. Gentle presence boost to even tonal response ensures clarity and projection. Minimal proximity effect provides consistently clear bass and performance when singing closer to or further from capsule. Also available with a switch (835-S).




TECHNICAL DESCRIPTION :

Frequency response: 40Hz...16kHz:
Transducer principle: Pressure gradient receiverPick-up pattern: CardioidFront-to-back-rejection at 1kHz at 120 degrees: >20dBSensitivity (free field, no load): 1kHz 2.7mV/Pa = -51.4dB (0dB=1V/Pa)2.7mV/Pa = -71.4dB (0dB=1V/mbar) (USA)Nominal impedance at 1kHz: 350 ohmsMin. terminating impedance: 1000 ohmsSensitivity to magnetic field at 50Hz: 1 µV/µTWeight: 330 gDimensions: 48 x 180mmDelivered with pouch and mic clip


CATALOG DESCRIPTION:
Excellent dynamic stage vocal mic@Even frequency response on- and off-axis@Gentle presence boost and minimal proximity effect@Cardioid polar pattern; 40Hz-16kHz frequency response

Thursday, July 24, 2008

JVC XA-A50 Headphones

JVC is entering the digital audio player market with the XA-A50. At first glance, it looks like a pair of headphones but wait! there’s a digital audio player hidden inside there. The unit contains 128 MB of flash memory that allows you to store either MP3 or WMA files. Another plus for the XA-A50 is its support for WMA-DRM files. JVC suggests that the headphones will last for 20 hours continuously on one AAA battery.

The new model called the XA-A50 is a pair of headphones with a digital audio player built-in.

Lightweight and wearable, the unit contains 128MB Flash Memory that stores up to 30 MP3 or 60 WMA files.

JVC believes that the new form factor will be highly sought after even though the memory capacity is so small compared to other units available on the market.

As well as storing and playing MP3 or WMA files, the unit is also compatible with WMA-DRM files. Keys are placed on the side of the right-ear while Voice Guidance ensures easy playback and set-up while you are wearing the unit.

JVC are also promising 20-hour continuous playback with one AAA alkaline battery also stored within the unit.

The XA-A50 transfers files via a USB2.0 connection and rather than opt for a proprietary software package you can use the set with Windows Media Player 9 or above.

The unit also provides 2 digital surround modes and 4 SRS modes - SRS TruBass, WOW MODE 1, WOW MODE 2, and WOW MODE 3.

The headphone unit also offers 5 preset EQ modes - FLAT, CLASSIC, ROCK, POP, and LIVE.

Monday, July 21, 2008

DENON AVR-3808CI AV RECEIVER


The AVR-3808CI is the latest update to Denon's acclaimed three thousand series A/V receiver line. Technology advances and careful engineering has yielded a receiver with the features and functions to take it well into the future of home theater. The AVR-3808CI has joined the CI ranking with the addition of expanded connectivity including networking and Internet radio. Updated Audyssey audio processing has refined the calibration process producing better sound and room balance, even with difficult acoustical conditions. Digital video connections in the AVR-3808CI now have HDMI v1.3a which brings with it the new surround formats for HD decoding. Portable device hookup has also been improved for ease of use.
CLICK ON THE IMAGE FOR MORE DETAILS AND TO VISIT
PROFESSIONAL DENON WEBSITE.

Electro Voice RE20 Microphone

RE Series Wired Microphones




Industry Standard Variable-D® dynamic cardioid microphone l Favorite among broadcasters and sound engineers worldwide l Variable-D® design and heavy-duty, internal P-pop filter reduces proximity effect l Internal element shock mount reduces vibration-induced noise l Bass roll-off switch



Specifications
Element Dynamic
Polar Pattern Cardioid
Impedance, Low-Z balanced 150 Ohms
Connector Type 3-pin XLR
Open Circuit Voltage 1.5 mV/Pascal
Finish Fawn Beige
Case Material Steel
Weight Net 737 g ( 26 oz )
Dimensions (Height X Max Diameter) 217 x 54 mm(8.54" x 2.13")




Microphone Applications:


Accordion, Acoustic Strings, Brass, Guitar Amp, Kick Drum, Snare, Speech, Tom, Woodwinds

Electro Voice SbA760 Subwoofer

The Electro-Voice® SbA760 is the next generation of hi-power compact subwoofers, has different box tuning and a new woofer (EVS-15FR) for more punch and low end compared to its predecessor the SbA750. Designed to match Electro-Voice® Sx-Series speakers, it is an ideal system extension for SxA100+, SxA250, and SxA360 powered speakers. The SbA760 adds extended low frequency response to Sx300 and Sx100+ passive speakers driven by powered mixers. The state-of-the-art class H power amplifier module delivers 760-Watts RMS power to an EVS15FR 15” woofer. The SbA760 includes a recessed pole mount and four casters for easy use and mobility.


Specifications
Amplifier Power (RMS) 760 Watts
Frequency Response (-10dB) 45 - 150 Hz
Max. SPL / 1m (calc) 128 dB
Color Black
Chassis Size 15 inches
Speaker Type Powered Speakers, Powered Subs, Subs
Weight Net 43 kg ( 94.8 lbs )
Dimensions (HxWxD) 603 x 428 x 665 mm(23.74" x 16.85" x 26.18")

Thursday, July 17, 2008

WHO LET THE DOGS OUT....!

Who let the dogs out...! is the small remix bit for listening relaxation.....!


CLICK ON THE IMAGE TO DOWNLOAD THE SONG....!

VENGA BOYS


Venga boys:: The Super Hit Album now in 6.8 mins..



The mixture of all the songs from venga boys. So listen the album in 6.8 min with extra bass.




CLICK ON THE IMAGE TO DOWNLOAD THE SONG....!

Wednesday, July 16, 2008

SHIVAJI.... (Telugu Tamil remix)

This is other type of remix.... from one channel you will listen the telugu lyrics and from other channel tamil lyrics... but the MUsic composition is same for both....
CLICK ON THE IMAGE TO DOWNLOAD THE SONG....!





So the song with two languages...

GAJINI... - (Telugu-Tamil Remix)




This is other type of remix.... from one channel you will listen the telugu lyrics and from other channel tamil lyrics... but the MUsic composition is same for both....




CLICK ON THE IMAGE TO DOWNLOAD THE SONG...!





So the song with two languages...


DOLL... BAND MIX...!

This is the remix of superb punchy beats for dance... (do baarr, theen baarr like that), SO enjoy and dance from this extra remix Beat.


Click on the image to DOWNLOAD the band mix...!

Telugu Remix Song from Jalsa

Jennifer Lopez...! from Jalsa Movie. *ing: Pavan Kalyan, Iliyana, Parvathi Melton.


Click on image to download the SONG....!




This is the song Remixed for extra beat...


Just listen the song and ENJOY...!

Saturday, July 12, 2008

Soundproofing your Studio on a Budget

Building a soundproof studio doesn’t necessarily have to break the bank. There are many new and innovative products that can be used to obtain professional results. It is always best when building a studio to squeeze every STC (sound transmission class) point you can from the materials you are using. Some of the things that will help you towards that goal are staggered studs. Staggered studs is where the studs are offset so that there is less wallboard to structure contact. In other words, the drywall or soundboard would only come in contact with every other stud on a wall assembly. Staggered studs are a relatively cheap way to begin soundproofing your studio.
The next thing we want to look at is insulation for the wall (stud) cavities and the joist cavities for a ceiling. I always recommend a sound batt insulation called Roxul to be placed in wall cavities and up against the top of the ceiling cavities. Roxul is a rock wool insulation that absorbs sound and helps to damp the structure in either a wall or ceiling assembly. In a ceiling cavity you can fill the rest of the cavity with regular fiberglass insulation. That way the fiberglass insulation would be isolated in the cavity. Keep in mind that regular fiberglass insulation is a not a very good soundproofer.
Once we have the insulation installed in both the wall and ceiling cavities we come to a crossroads. For the best soundproofing you would want to float the walls and the ceiling using sound clips and metal furring channels. Sound clips are sound isolating devices that are used to suspend a ceiling or wall. Metal furring channels are a channel that fits into the sound clips and then become the interface between the drywall and the joist or the studs. The sound clips system is a suspension system that acts to isolate the new ceiling from the joist or stud structure.
If you can’t do a floated wall or ceiling, don’t despair there are other barrier and damping materials that can be used to soundproof the walls and ceiling of you studio.Mass loaded vinyl is a product that is widely used as a soundproofing agent throughout the United States and Canada.
Mass loaded vinyl, or MLV as we like to call it, is a high grade vinyl material that is impregnated with barium salts and silica to give it the same properties as lead sheeting, but without the hazards associated with lead. MLV can be stapled directly to the open studs of a wall assembly or to the joist structure of a ceiling assembly. The MLV would be stapled or nailed to the structure using an industrial stapler or a nail gun that shoots the roofing nails with the plastic heads. A plastic cap stapler is actually the best stapler for this application. Once the MLV has been stapled up to the stud or joist structure, you would liberally caulk all seams as well as the perimeter with an acoustical caulk. Generally any reputable soundproofing company that sells MLV will also have acoustical caulk available. After you have installed the MLV and have sealed it properly, you next step is to drywall over top of it with a layer of 5/8” drywall. It is also advisable to caulk the seams of the drywall to make sure you have a good sealed wall or ceiling assembly. A well-soundproofed wall using the MLV can be up around a 45 to 50 STC, which is pretty good considering what an untreated wall assembly would be. You also have the option of using the sound clips and furring channels in conjunction with the MLV to give you even greater soundproofing.
There are other soundproofing agents such as Green Glue and Closed cell foams that can help in your effort to soundproof your studio, but we will discuss them later in other articles. We will also discuss studio doors and windows in subsequent articles. The Experts at www.soundproofingamerica.com can help you obtain these great soundproofing products and they can also help you with the acoustical treatments you will need once your studio is completely soundproofed. I hope this article has been informative and gives you the knowledge that you can indeed build and soundproof you home or commercial studio effectively and economically. This is Dr. Bob…Out!!

Soundproof Doors

I wanted to write this article to educate people about soundproof acoustical doors. There are basically four companies in The United States who specialize in soundproof door assemblies. I will not mention them by name, but suffice it to say that soundproof doors are produced in limited quantities and therefore prices for these doors can be astronomical. As a general rule, a professional quality soundproof door of any size will have a minimum price of $3800 - $4000. This would be a bottom line door with perhaps a 40 to 42 STC rating. STC means (Sound Transmission Class). If you are looking at a soundproof door that is in the 50 STC range and greater, you can pretty much double the price you’ll pay for your door.
Now before you panic or throw your hands up and surrender, there are now companies that are manufacturing soundproof doors that are already pre hung and ready to install into your rough opening. They are using much more state of the art materials and these doors look much less industrial then the doors currently available.
These soundproof doors will match any decor and have and STC rating of up to 56 STC.These studio grade doors come in at about $2400 for the oak version, but for a little more you can get the door made in any species of wood from cherry to teak. This new generation of soundproof door is less heavy than the traditional soundproof acoustical door and as stated above come in the more traditional wood style as opposed to the metal industrial looking doors.
These doors are not just for recording studio doors; they are used in home theaters, Testing facilities, conference rooms, medical facilities, doctors offices, industrial office spaces and by Law enforcement agencies for interrogation facilities. The uses for these doors are endless. They come pre hung with all of the necessary hardware to install the door immediately into your rough opening. The heavy duty handles and hinges come in both silver and brass.
These doors fill a void in the soundproof door market somewhere between realistic and ridiculous. The name of these fantastic doors is the Sound Vault™ Soundproof acoustical door and they are only available from Soundproofing America Inc. These doors are a cost effective alternative to the heavy metal industrial looking doors that are sold by some of the other soundproof door companies out there and the entry level pricing makes this door much more affordable to the general public.
Do your research and I am sure you’ll find that the Sound Vault™ soundproof acoustical door to be an exceptional value at just $2400. The lead-time for these windows is 30 days or less in most cases and there are pre-made windows in standard sizes ready for immediate delivery. For more information on these high quality soundproof doors, contact the professionals at Soundproofing America, Inc. Until next time, this is Dr. Bob…out!!

Friday, July 11, 2008

Soundproofing a floor on a budget

Floor soundproofing can get quite tricky especially if you are working from an existing finished wood or tile floor. It is always best to remove the existing finished floor and start from the sub floor, however, if your old finished floor is wood, then you can soundproof directly over top of it..
The most common issue with a floor is the transmission of impact noise (footfall) to the people below. There are methods for treating this problem from the ceiling below, but we will discuss them at another time. For now we will discuss soundproofing the floor above in a condo or apartment application.
There are many expensive soundproof floor under lays on the market today and most consist of a dense recycled rubber material. As a rule these flooring under lays are quite effective for stopping both airborne noise as well as giving you excellent impact protection, however due to their density and their shear weight these products are often expensive to purchase and expensive to ship.
The reason is that they come in tile form due to their rigidity. Thus they are palletized and shipped out via common carrier trucks. Depending on the number of sq feet you are covering, the shipping alone for these materials can be astronomical.There is a realistic and economical alternative to these expensive soundproof tiles. The alternative is also a recycled rubber product, but not so dense that it cannot be rolled into an easy to ship roll. The material I am referring to is a product called Impactless™.
Impactless™ is sold by the professionals at Soundproofing America, Inc. www.soundproofingamerica.com or www.yahoosoundproofing.com where you are able to purchase this product online.Impactless™ is an economical alternative to the more dense and costly rubber tiles and it will stop both the airborne and the impact noise from traveling down to the neighbor below. This rolled floor underlay is very economical at $1.50 per sq ft it is basically the same cost as the 1# mass loaded vinyl. The more dense tiles cost anywhere from $3-$5 per sq ft and as mentioned before the shipping can be astronomical.
There are a lot of soundproofing companies out there telling their customers that mass loaded vinyl (MLV) will work to soundproof a floor. If applied properly MLV can help with airborne noise, but it is just not effective at all for stopping impact noise which the concern of most people who soundproof their floors. The Impactless™ roll is also much cheaper to ship, generally $35 for a 108 sq ft roll as compared to $70 and up for mass loaded vinyl. Impactless™ is one of the best-kept secrets in the soundproofing business. When you are looking to soundproof an upper floor on a budget look no further than the American Impactless™ floor underlay. Until next time, this is Dr. Bob…out!!

DVD Players - Experience the Ultimate Enjoyment

A DVD player is a electronic gadget which plays DVD video and audio discs. It plays the discs with the help of reflected laser beam. Normally these players are also capable to play CD audio, video and even picture CD. In the year 1997 the first DVD player model was introduced in the market. Before the DVD players arrived into the market, the laser discs were very popular. But with several attractive features, DVD players have replaced them.
DVD players produces high quality audio and video output. This is so because of the digital format. It delivers twice the picture quality of VHS format. These devices are so advanced that that it can easily compete with home theatre. The new generation DVD players come with the capability to hold video, audio and even computer data.
There are several companies out there in the market which manufacture superior quality DVD players. The names are Sony, Philips, Videocon Panasonic, Bosch etc.The players do read a DVD disc in ISO – UDF version 1.2 format. It also can read and obey the DVD's regional lockout codes and display a warning if the player is not authorised to play the DVD discs. The players decode the MPEG-2 video stream with a maximum of 10 Mbit/s. It decodes sound in MP2, AC3 or PCM formats and produces output on stereo, optical or electric digital connector. The gadgets normally comes with a remote control. A remote with simple layout ad visibility labelled functions makes the navigation easy for the user.
Mostly the DVD players can be connected to a television set. In this case, if television set supports component video input then the required DVD player would be component video output. There are also some small portable players are available in the market which have an attached LCD screen. With the gradual demand of DVD players, the manufacturers are now coming with new and innovating brands of DVD Players. Tuning with the traditional rules of market the price has increased.

Thursday, July 10, 2008

Soundmatters subStage Slim Subwoofer

Now you can enjoy deep, full bass without compromising your home décor. The Soundmatters SUBstage features a slender, stealth design that makes it exceptionally easy to hide in just about any room. Tuck it under a couch or an end table — even out of the way, the SUBstage delivers impressive low-frequency sound.
This elegantly compact powered subwoofer is versatile enough to fit into almost any home theater setup. Add it to a compatible television for better sound from TV shows and movies, or use it to round out a surround sound system. And if you're looking for more potent lows, you can "daisychain" multiple SUBstages together, giving you powerful bass even in larger rooms.


Details:
Video-shielded
100-watt RMS amplifier
6" front-firing driver with dual rear-firing passive radiators
Frequency response 35-200 Hz (±3dB)
Continuously variable 50-200 Hz crossover
Phase switch
Auto on/off
Line level inputs (RCA and mini-jack)
Includes 16' interconnect cable, adjustable multi-surface feet
17"W x 5-3/16"H x 8"D
Warranty: 5 years drivers, 2 years electronics

for more details:

for pictures:

Polk RM75 Speakers

The Polk RM75 offers exciting wraparound audio effects in a sleek, modern design. These compact, wall-mountable satellite speakers fit beautifully in most rooms, and they're a great cosmetic match for a flat-panel TV. You get two front speakers, one center channel, and two surrounds. Just add any subwoofer to complete the system and enjoy full, detailed home theater sound.


Each stylishly sculpted speaker sports a heavy-duty, non-resonant composite enclosure. All five feature carefully designed ports for clean midbass and better blending with a subwoofer. The included wall-mount brackets let you pivot the speakers up to 180 degrees, so you can easily aim them toward your listening position for the best possible performance.

Details:
Front and surround speakers:

Acoustic suspension (sealed) design
Each handles up to 100 watts
1/2" dome tweeter
2-1/2" woofer
Frequency response 140-20,000 Hz (-3dB)
Sensitivity 89 dB
Include wall-mount brackets
3-7/8"W x 6-1/8"H x 3-13/16"D
Center channel speaker:
Acoustic suspension (sealed) design
Handles up to 100 watts
1/2" dome tweeter
Dual 2-1/2" woofers
Frequency response 130-20,000 Hz (-3dB)
Sensitivity 89 dB
Center speaker cradle included
9-7/16"W x 3-7/8"H x 3-13/16"D
System specs:
Video-shielded
Black finish
Warranty: 5 years


for more details or to buy click on this link


for more Speaker Pictures click on this link

Velodyne's remarkable DLS-3500R Subwoofer







Velodyne's remarkable DLS-3500R delivers deep, clean bass, using a 160-watt amplifier and advanced circuitry that controls the sub's performance with pinpoint accuracy. The included remote lets you adjust the volume and select from four preset listening modes, so you can dial in the perfect bass settings from the comfort of your favorite chair.

Details:



Bass-reflex design
160-watt RMS amplifier
8" front-firing driver
Frequency response 35-140 Hz (±3dB)
Continuously variable 40-120 Hz low-pass crossover
Stereo line-level input with crossover bypass switch
Stereo line-level output with 80 Hz or 100 Hz high-pass crossover
Speaker-level inputs and outputs with binding post connectors
4-position phase control (0º, 90º, 180º, and 270º)
Volume control
Auto power on/off
Remote control included
12"W x 15-9/16"H x 16-1/4"D
Warranty: 2 years






for more details or want to purchase.... click on this link.
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=12300&i=2323500RB&tp=187
for more Speaker pictures... click this link

Monday, June 30, 2008

Yamaha YST-FSW100 Subwoofer



  • Total power: 130 Watts / Magnetic Shielding Prevents Unwanted Interference / Stylish Design Matches Plasma and LCD TVs

  • Yamaha's high-performance YST-FSW100 Advanced YSTII Subwoofer gives your Bassthe extra thump it needs when you're enjoying your favorite songs or movies.

  • How does it deliver that? For starters, the new "Half Pipe" port design smoothes out the bass and minimizes unwanted noise.

  • The advanced YST II technology drives the speaker cone with tighter control than before, giving you a more stable and accurate low-range response and more natural, energetic bass reproduction.

  • The attractive, stylish design matches perfectly with the newest Flat-screen monitors and Plasma TVs.

  • Specifications

  • Dynamic Power: 130 Watts
  • Output Power(5 ohms, 100Hz, 10% THD): 75 watts
  • Frequency Response: 30-200 Hz
  • Magnetic shielding around Drivers Block interference that causes Distortion
  • Color: Black
  • Dimensions(WxHxD): 15 3/4" x 14 3/4" x 6 3/16" (400 x 375 x 157 mm)
  • Weight: 19.8 lbs. (9 kg)

Sunday, June 29, 2008

SHURE UM2 In-Ear Earphones


The SHURE UM2 Dual Driver In-Ear Earphones, a perfect companion on your musical journey. The SHURE UM2’s new dual balanced armature drivers, with a passive cross-over for each ear, give optimized audio reproduction. Designed to meet the highest professional standards, the UM2 dual driver earphones are perfect for both on-stage performances as well as for personal use.Are you a hardcore music lover? The UM2 offers great audio fidelity. Loud environment will no longer interfere with your enjoyment of music as these earphones can reduce up to 25 db of ambient noise. The UM2 dual driver earphones work well with personal audio devices like MP3s, CD players, and laptop computersSay goodbye to boring trips with the UM2 true fit in-ear earphones as your personal travel companion. Use comfortable Comply foam tips when you want to listen to music for long durations. Keep your UM2 earphones in a hard shell padded case for safe storage and clean them with an included wax loop. The UM2 comes with a durable 50" stereo "Y" cord and a 3.5mm stereo jack. Superior sound at an affordable price makes the Westone UM2 Dual Driver In-Ear Earphones, an attractive choice.


SHURE UM2 are the ONLY Earphones MADE IN USA!


UM2 Specifications:
Cable lentgh: 52 inches
Sensitivity: 119 dB/mW
Frequency response: 20 Hz -18 kHz
Impedance: 27 ohms
Driver: Dual balanced armatures with a passive crossover
Features: Replaceable foam Comply Canal tips, zip carrying case

Shure SE420-K Black Earphones


The Shure SE420 K Black Earphones are the right choice for on-the-go listeners. If you are looking for both comfort and performance, you don’t have to look further than the Shure SE420-K earphones.

The Shure SE420-K sound isolating earphones are perfect for listening to high-quality recordings. Thanks to integrated passive crossovers, each frequency range remains distinct throughout the audio spectrum. Even if you are in a noisy place, you can hear your music distinctly as these earphones block ambient noise.

The Shure SE420-K ensures comfortable listening with high-output audio sources, like airplane armrests.

The Shure SE420-K earphones can be used with most of your portable music devices. During overseas travel carry the included airline adaptor to optimize compatibility with European airplane armrests.

The premium fit kit includes sound isolating sleeves in different sizes to offer a perfect fit. Use the Shure SE420 K Black Earphones for long hours without any discomfort.

The Shure SE420-K sound isolating earphones come with a detachable modular cable and a 3-foot extension cable to enable personal customization. The included carrying case is the best place to store your earphones safely.The Shure SE420-K features Dual TruAcoustic MicroSpeakers; the SE420 uses a dedicated tweeter and woofer to provide a detailed sound stage. Lows, mids, and highs are distict and defined - for accurate reproduction of all the details of your music.


Specifications:
Weight: 1.02 oz (29g)
Speaker Type: Dual TruAcoustic Microspeakers
Sensitivity (1mW): 109 dB SPL/mW
Impedance (1kHz): 22 ohms
Frequency Range: 20Hz
cable Lentgh Without Extension: 18in./45cm
Cable Lentgh With Extension: 54in./136cm

The Best Earphones for iPod and other MP3 players


We strive to be the best at what we do. We know the difference between a dual driver earphone and a single driver earphone, the difference between the sound signatures of a Shure earphone, an Ultimate Ears earphone and a Westone earphone. We can tell you what “microphonics” is.



So you can trust us when we rank the best earphones here. All of the in-ear earphones (also known as ear canal headphones) you find on Earphone Solutions are special and of the highest quality, but the ones you see rated here are, well, extra-special. Of course this is a very personal matter, however we have found along these 7 years that, the great majority of our customers that had the chance to try more than one model, are in agreement with our findings. Our staff, contributors and friends simply listen to all the earphones and then we vote the best earphones for the iPod and other portables. We listen to all kinds of music in different situations and with different sources. We do not get hung on technical specifications. We simply listen to them. We also take in account comfort, fit, ease of use, build quality, manufacturer's warranty, manufacturer's customer support, cost and of course, sound quality, in order to rank the best earphones.So, after much testing, jogging, listening at home, on the airplane, at the subway station, we decided to list here the best in-ear earphones available today in the market.

The best earphones are listed here in order of our preference. The Shure SE530-PTH, most recent arrival Shure SE420 and the UM2 are our overall best ear canal headphones, combining the best fit, comfort and sound, along with the best fitting cables. The difference here between the UM2 and the SE530 (SE420 has the same sound signature but on a dual driver configuration -- less expensive, slightly less detail) will be personal taste. The SE530 outputs slightly more detail in the mid range and highs. The UM2 has slightly stronger bass. The SE530 is slightly brighter while the UM2 is slightly more balanced (flatter). The Shure SCL5 comes in second place now as the best option for professional musicians with very strong highs and lows. We tested them with a RIO player, iPod 30GB, iPod Nano, iPod Shuffle and a Sony CD player. Enjoy the "The Best Earphones" below!

Wednesday, June 25, 2008

Onkyo's HT-SP904 Home Theatre System


Enjoy crisp DVD playback, plentiful music options, and easy setup with Onkyo's HT-SP904. The receiver's advanced circuitry and high-current amplifier team up to deliver precise, intense sound effects from the included speakers and subwoofer. And the Audyssey 2EQ auto calibration system makes precise setup a breeze — the receiver automatically optimizes this system's sound for your room, so all your sources sound their best.

Top-notch picture and convenient HDMI switchingOnkyo designed the DVD player to produce a crisp, detailed picture from your favorite movies, TV show box sets, and concert videos. If you have an HDTV with an HDMI input, the DVD player upconverts the signal from standard DVDs to match your set's high-definition display. And if your television has only one HDMI input, you'll really appreciate the receiver's 1080p-compatible HDMI switching capability. This lets you hook up the DVD player and a second high-resolution video component and switch between them easily, while maintaining the best possible picture quality for both. You'll also get plenty of other audio/video inputs and outputs to accommodate your gear, including high-definition-capable component video.
Read More
Extras for music fansYou can play digital music stored on your iPod with the included iPod dock. It lets you view track information on your TV screen and control the iPod using this system's remote. You can also add XM or SIRIUS satellite radio to enjoy a huge selection of music, sports, and talk radio programming (see Details for required accessories).

DETAILS:


General

Front Surround Power (watts) 110
Center Channel Power (watts) 110
Rear Surround Power (watts) 110 x 2
Frequency Response 1 kHz
DVD Player Yes
Multibrand Remote Yes
Receiver Parts Warranty 2 Years



Surround Formats



Dolby Pro Logic II Yes
Dolby Digital Yes
DTS Yes
DTS Neo:6 Yes



Inputs & Outputs
Analog Audio Inputs 6
HDMI Inputs 2
HDMI Outputs 1
Optical Digital Inputs 2
Coaxial Digital Inputs 2
Composite Video Inputs 4
Composite Video Outputs 1
S-Video Inputs 3
S-Video Outputs 1
Component Video Inputs 3
Component Video Outputs 1



Speakers
Number of Speakers 6
Enclosure Type Acoustic suspens'n
Video-Shielded Yes
Wall-Mount Bracket Included Keyhole slots



Subwoofer
RMS Power (watts) 230
Woofer size (inches) 10

About Me

My photo
Hyderabad, Andhra Pradesh, India
Freelance Live Audio Engineer/Systems/Faculty/ https://www.facebook.com/kanny555 +918143455561